LED Strip Lights offer numerous advantages over more traditional luminaires, such as incandescent, halogen and fluorescent. A few of these are intrinsic to LED-technology generally, such as a longer endurance, while others are unique to LED Strips, such as flexibility. This article will outline a number of the advantages offered by these new generation strip lights.
Like all LED-technology, LED Strip Lights use significantly less electricity in their operation. An average meter strip of LEDs uses about 7.2 watts in power, which works out to about 90% more effective than other kinds of lighting. This makes them incredibly affordable to operate and allows users to experiment with much larger installations with no anxiety about running up excessive utility bills.
LEDs have the ability to recreate a much wider selection of colours than traditional kinds of lighting, making them especially worthy of effects light installations. Along with the typical warm white and cool white, which are used for ambience, LEDs may also develop a wide spectral range of traditional colours. LED Linear Lighting
LEDs have a endurance that far exceeds that of traditional luminaires. An average Strip Light can last up to 70,000 hours.
Traditional luminaires tend to be housed inside glass enclosures, which are fragile and inflexible. In contrast, the LEDs on strip lights are mounted to a flexible “ribbon” of circuit board which may be bent around 90 degree corners and be made to suit to surfaces with a changing gradient.
These lights are usually considered a “linear” light source, due to their very long, thin design. This enables them to be fitted in locations that many other kinds of lighting can’t. Under kitchen cabinets, alcoves, shelves, bookcases; you name it, strip lights can do it!
Halogen and incandescent light bulbs are notorious for becoming scorching during use. LED Strips on one other hand produce comparatively little heat, making them much safer to make use of and less of a fire hazard.
Mounting Strip Lights is surprisingly easy and requires very little expertise. Most strips have a 3M self-adhesive backing, allowing them to be stuck along onto a floor without the necessity for mounts or brackets. Even when they do not have a self-adhesive backing, installing brackets remains quite easy and much less hassle than installation a fluorescent tube, for example.
LED Strip Lights are among the few kinds of lighting available which can be cut. They feature cutting points all along their length, which may be used to shorten or separate strips. Non-solder connections can be used for easy re-connection, or you are able to ask your retailer to do the job for you.